ROHR2 Results Export

ROHR2 offers various data formats for the export of calculation results.
The number of generated results contains general data as well as particular parameters to be transferred by manufacturer software tools.

Support data

Export of general support data ROHR2 offers various data formats for the export of calculation results
The number of generated results contains general data as well as particular parameters to be transferred by manufacturer software tools.
Manufacturer specific software formats

ROHR2 generates individually adapted export files to be used in the CAE systems:
• LICAD (LISEGA GmbH)
•CASCADE and FLEXPERTE (Witzenmann GmbH)

CAD-Export

PDMS Interface ROHR2 PDMS Interface ROHR2
In addition to the import of PDMS data ( see 2.1, Neutral interface)  ROHR2  results can be exported into PDMS.
The data export from ROHR2 to PDMS includes load case dependent support results and deformations.
Deformed structures may be represented in PDMS this way. Beyond that, in PDMS calculation results are stored for further treatment, e.g. LICAD hanger design software.
NTR Data export

ROHR2 includes the export of Neutral File data. The export of NTR files (*.ntr) is carried out by the ROHR2 command by File| Export| Neutral interface.

PCF Data export

The PCF - ROHR2 interface includes the export of ROHR2 system data in PCF format.

Export of graphics

Export by ROHR2 ROHR2drawings can be exported into the file formats:
- Metafile (*.emf)
- HPGL
- DXF
The export into dxf format e.g. can be used for processing in AUTOCAD. The generated data is of 2D dxf drawing type with restricted modification capability.
ROHR2 DXF Export